is the retainer bolt on the front dampener pulley left or right hand thread?

is the retainer bolt on the front dampener pulley left or right hand thread? 1 Answer

I have a 2002 infiniti g20 and the mass airflow sensor went bad and I replaced it and it still will not run a friend said something about having to sync the mas and the computer together is this true 3 Answers

Any help is welcome

does anyone know about a powersteering leak and how is caused on a 1992 infinity g20 is this a common thing??? if so is it the pump or pressure line or return line??? 3 Answers

question is stated above on powersteering

2000 but won't go over 2,000 rpm, will not communicate thru OBD II or manual attempts. 1 Answer

MEC12-075 A1 2926 engine ecu does not match vehicle. any charts out there for 2000 model g20 ecu's? Trunk says turbo, but NA engine under hood. Engine has apparently been swapped from turbo to NA engi...

Loud rubbing noise from front drivers side wheel on 2002 Infiniti G20 1 Answer

I have a 2002 Infiniti G20 and its making a very loud rubbing noise from the left front wheel. It goes away when I apply the breaks and hit the gas, and its goes louder and faster with the acceler...