2000 Poniac montana ran fine then stall in road now no crank no start . i went to the fuse box under the hood found the number 11 relay (ignition relay) put a jumper wire on it and it starts and runs
16 Answers
Sound,s like you found the problem,change relay.
2 people found this helpful.
I did change it and got no crank then i put the jumper wire on new relay and it starts
2 people found this helpful.
If new relay,doe,s not click when you turn igntion,may be bad igntion switch.
2 people found this helpful.
By jumping you are sending fire, to start it,recheck that new relay make sure it is not bad,then check the switch.
3 people found this helpful.
Best Answer
Mark helpful
With new relay in i turn key and no click at relay so wat is the priblem?
1 people found this helpful.
Igniton switch,is bad,it send,s fire to relay,
1 people found this helpful.
Are you sure you checked fuse check number 5?
2 people found this helpful.
Number 11 is the relay i put 3different relays in and nothing but i use jumper wire on relay and it starts
Ok,if your key has chip in it it will do this all so,if chip is bad.
1 people found this helpful.
But it still lead,s back to the igntion,
1 people found this helpful.