Why are my spark plug wires not plugging in?
noticed my check engine light turning on and intermediately flashing, so I checked my
spark plugs. Only two of the spark plug wires were plugged in and they will not go in at all.
noticed my check engine light turning on and intermediately flashing, so I checked my spark plugs. Only two of the spark plug wires were plugged in and they will not go in at all.
2006 Ford Ranger
-
Maintenance & Repair
So I have a 2000 Ford ranger with the 4.0 and I've replaced the coil pack and plug wires. I have also checked all fuses and it's still not getting any spark. Anyone know why?? Thanks in advance
2000 Ford Ranger XLT Extended Cab Stepside 4WD SB
-
Maintenance & Repair
I've replaced battery starter alternator fuelpump throttle position sensor coil pack spark plugs
1995 Ford Ranger XLT Extended Cab SB
-
Maintenance & Repair
The fuel pump, starter, inertia switch and fuel pump relay are new. The fuses in the distribution box look good. Crank no start condition. No Fuel, no spark.
1998 Ford Ranger
-
Maintenance & Repair
I have a 1984 Ford Ranger 2.8 V6 it has no spark no fire I've changed the ignition coil the modulator the rotor and the distributor cap and still no fire the plug on the ignition coil wires have be...
1984 Ford Ranger STD Standard Cab SB
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.