i have a 2000 s10 an i changed both front bearings an it still soubd like there is a bearings r bad and gets worst as i speed up cant go over 55 afraid sinething might explode need help tganjs

i have a 2000 s10 an i changed both front bearings an it still soubd like there is a bearings r bad and gets worst as i speed up cant go over 55 afraid sinething might explode need help tganjs 3 Answers

I have an 01 s10 manual that i cant get out of neutral, when i try an push the shifter into gear it makes a nasty sound. is this a transmission issue or a master cylinder problem, my clutch sinks all the way too the floor there is no leverage in the pedal? any help would be appreciated. 3 Answers

Manual s10 2001 won't come out of neutral. Clutch pedal sinks all the way to the floor with no leverage. Curious to know if anyone could tell me a solution?

I have a 1991 Manual 5 speed chevy s10 v6 2.8 L, and I need to know what type or weight of manual transmission fluid is acceptable? 7 Answers

I have a 1991 Manual 5 speed chevy s10 v6 2.8 L, and I need to know what type or weight of manual transmission fluid is acceptable? I have asked my auto parts store and they have really good stuff t...

I have a 91 Chevy s10 pickup 2wd v6 4.3L. I can not get fuel to go through throttle body. I changed fuel pump, fuel filter and tested it all the way up to the injectors. has to be an elect. Issue 8 Answers

I get fuel all the way to the injectors but when I turn truck over nothing comes out of injectors.

my 1989 chevy s10 jumps really bad when i get to a surtin part in the throttle idk what it is need help 4 Answers

my 1989 chevy s10 has a 2.5l throttle body engine jumps really bad when you get to one spot on the throttle evry thing else is good runs good only that one spot in jumps around really bad linke its ...