didnt drive truck for two days, came back and tried to start it and it would just turn over but not fire, i checked the distributor and the wires to the spark plugs no help, took the fuel pump relay o

didnt drive truck for two days, came back and tried to start it and it would just turn over but not fire, i checked the distributor and the wires to the spark plugs no help, took the fuel pump relay o 1 Answer

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...

okay so I just did my tune up. I drove the truck yesterday and it drove fine. everyone keeps telling me that the timings off. but I have everything in the right firing order and now its not starting its back firing and now I have smoke coming from under the hood. the spark im getting is an orange color. the truck is acting like it wants to start the motor turns but it wont completely start. please help! 4 Answers

just changed spark plugs, cap, rotors, and wires. the truck ran fine and started fine just yesterday. Chevy C1500, Motor350 5.7 V8.

what would cause the fuel pump not to turn on at first and no spark im not even getting a voltage at the coil 3 Answers

no spark and the fuel pump doent turn on at first. tested the pump it works even with the bypass wire. new dist., new oil pressure switch

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engine i think controls when the spark happens i also replaced the module on backside of distributer, the distributer, the coil,the wires the plugs, bht havent done the cap and roter.is that the only thing that will stop the spark process?ive also checked the oil pressure and water temp sensors 3 Answers

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engi...