mdrinkwater answered 7 years ago
1. Check for Spark 2. Check for fuel pressure 3. Check compression across your cylinders It could be a broken timing belt/chain...you won't get good pressure tests on your cylinders if the chain/belt is broke, because your cam won't turn when you crank the engine, so valves won't open and close as they should when your piston is TDC.
The truck cranks but doesn't start I replaced the fuel pump what else should I do
2002 Ford Explorer Sport Trac
-
Maintenance & Repair
It cranks but won't start spayed either in it started then died
2001 Ford Explorer Sport Trac 4WD Crew Cab
-
Maintenance & Repair
My story trac cranks over but won't start. It just died going down the road at 70mph replaced o2 sensors, fuel filter, crank shaft sensor, cam shaft sensor mass airflow sensor, starter, what the h...
2003 Ford Explorer Sport Trac
-
Maintenance & Repair
I had changed the steering wheel on myself because the horn doesn't work, the front windshield wiper's don't work, the back windshield wiper doesn't work or spray the window washing fluid and now that...
2001 Ford Explorer Sport Trac 4WD Crew Cab
-
Maintenance & Repair
New fuel pump and filter. New crank shaft sensor. The fuel saftey switch is good. Fuel compretion was 55psi and now this morning its 23psi. When it never even started. It cranks over. Motor has sp...
2001 Ford Explorer Sport Trac Crew Cab
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.