Hi I have a 2006 Ford bBantam with Rocam engine . We repared the top after a blown top gasket. All timing marks are right . It gets spark and fuel . It Tuns over , but just dont start

Hi I have a 2006 Ford bBantam with Rocam engine . We repared the top after a blown top gasket. All timing marks are right . It gets spark and fuel . It Tuns over , but just dont start 1 Answer

i have a 2006 ford bantam rocam the engine has been done but when i start it it does not ref up it does not have a knock sensor and no wiring for that either 1 Answer

i have a 2006 ford bantam rocam the engine has been done but when i start it it does not ref up it does not have a knock sensor and no wiring for that either

Hi all! My ford bantam 2003 model 1,6i XLE rocam engine is overheating after few minutes after I started.Fan tested and is functioning well. What could be the problem? Theo.V 6 Answers

My ford bantam 2003 model 1,6i XLE rocam engine is overheating after few minutes after I started.Fan tested and is functioning well. When I switch on the aircon the fan works fine & when it goes to re...

i have problem I have changed oil pump but oil light still flashes and engine makes noise can any help it is rocam 1.3 2006 4 Answers

bantam rocam engine noise I have replaced oil pump but it has noise when Idling or driving

how do i determine TDC with the camshaft on the ford bantam 1.3i xl 2006,rocam engine,so that i can set the timing correctly? 12 Answers

I am struggling to start my Ford Bantam 1.3i xl 2006 rocam engine,it seems like my timing is not correct and the engine is totally dead , no miss firing