have a 04 2wd lights on when i start all the lights flash the comp klicks nothing changes

have a 04 2wd lights on when i start all the lights flash the comp klicks nothing changes 1 Answer

I started our 98 Chevy blazer was in 4wheel drive and had not been engaged. When I pressed the button on dash to put in 2wd lights start flashing and won't change right away had keep trying to get it 7 Answers

Started my 98 Chevy blazer this morning and was in 4wd it has done this couple times since we got car, when pushing button to switch to 2wd you can hear the electronics trying to change but the l...

I have a 1999 Chevy s-10 Blazer 4x4 and I cannot put it in 4 wheel drive, the button on the dash is not lit up at all and nothing happens when I hit any of the 3 buttons, what's wrong??? 7 Answers

I know there is an actuator under the battery, and a plug on the transmission but I have no light on at all on the switch in the cab on the dash

i have a 04 chevy blazer that only goes in to 4x4 some times most the time i press the botton and nothing happens some times i press it and the lights flash on 4hi and lo and then go back to 2hi. then some time's it goes in to 4x4 but only grids go forwards and it works going backwards untill u reach about 3000 rpm. can anyone help me before i spend a lot of money on the wrong part 2 Answers

i have a 2000 chevy blazer 6cyl everthing comes on dash lights ect,but when u try to start it nothing .changed the starter,still nothing .could it be the ignition switch .never had any indications 1 Answer