is air intake to carb supposed to be sealed tight?

is air intake to carb supposed to be sealed tight? 2 Answers

have a '99 4.3 V-6,,,,,,is air induction supposed to be TIGHTLY sealed or just lay on?

Exhaust not as loud as it is supposed to be 3 Answers

I have an 88 silverado with a thi 350 in it. It has flowmaster super 10s with no cats and 2 1/4 inch pipe but it is really quiet for the setup. I had a 92 with the same set up and it blew eardrums ...

What is the fuel preßue supposed to be 1 Answer

I have a 1991chevy silverado w/350 or 5.7 l. Engine. Can I replace that engine with a 1987 305 or 5.0 l. Engine and since the "87" is carb. Engine can I use the 350's intake and T.B.I. On the 305 2 Answers

I was wondering if the 305 would go in and just leave the intake and carb on it, and run the truck with the carb on the engine, or would I need to use the 350 intake and T.B.I. Off of the 350. It wo...

2006 GMC Sierra with the 4.3. No power, had to be towed, only code is 0300 random misfire. 1 Answer

I was going down the interstate at about 72 mph and all was well. Then the truck started loosing power. By the time I got it off the interstate (about 1 mile) Foot to the floor, doing about 15 mph. ...