i replaced the battery and now radio not working
Asked by poohbear_1 Aug 12, 2012 at 12:02 AM about the 2005 Chevrolet Suburban 1500 Fleet 4WD
Question type: Maintenance & Repair
all fuses have been checked and are ok..clock works, I can put a CD in, but no display.
6 Answers
your security system in the radio itself has locked the radio (it doesn't know the difference between power loss from a bad battery or being stolen out of the car) if you take it to a dealer they can unlock it for you. I hope this helps.
poohbear_1 answered 12 years ago
Actually I unhooked the battery for an hour and when I hooked it back up, it worked.
Hey my 2009 chevy suburban has no power to start but has a clicking in the door take battery cables off and on it starts
My gmc acadia after the replace battry redio not work &no asisant park ? Plase help me
tmoore7189 answered 7 years ago
after spending 57 dollars at the dealership they disconnected battery jumped cables together and reinstalled battery and there you have it working just fine
My 2005 Escalade did this. Battery went bad & was replaced under warranty. Put the new battery in & the NAV radio had power but wouldn’t come on meaning I could eject the NAV disk but the radio display stayed blank. Disconnected the battery a couple times hoping it would reset but no luck. Turned out the aftermarket Bluetooth adapter was keeping the radio from syncing up with the truck. Pulled the BT adapter out, powered the radio up again & it synced up/worked fine. Put the Bluetooth adapter back in & now all is well. I don’t remember what brand BT adapter it is.
