my break lights on the bed and rear turn signals quit working, Ive checked almost everything I can think of, fuses, bulbs, etc. There is no power in wiring harness behind light. any answers?

my break lights on the bed and rear turn signals quit working, Ive checked almost everything I can think of, fuses, bulbs, etc. There is no power in wiring harness behind light. any answers? 3 Answers

2007 Ram 1500 (no brake lights, rear turn signals) 3 Answers

So my 2007 Ram 1500 has no brake lights and no rear turn signals. I’ve checked fuses and that wasn’t it and I’ve looked up and down for shorts in any wires. Bulbs are good. I’ve also cleaned the t...

Why is my lights and locks isn't working unless i turn the truck on?? 4 Answers

I have a 2004 dodge ram.... I put a radio in it now my lights and locks isn't working unless i turn the truck on....

My 94 dodge ram 1500, 5.2L, runs okay but began using lot of fuel. Had trouble codes 37, 32, and 51. Cleaned throttle body and checked for vaccum leaks or bad hoses. Code 32 gone away. Cleared code 51 which according to Haynes manual is not supposed to make the check engine light come on. Their is no code 37 in the Haynes manual for a gasoline engine on the 94 Ram. Their is for diesel engine. What is it, where is it at and how do I correct the problem. 51 I know is the O2 sensor. Truck runs great, shifts fine , but is still using more fuel than normal. Been reading about code 37 and transmissions, don't think my problem is there. Any help ? 5 Answers

Cannot get the Code 37 to clear, can disconnect the battery and the code 51 clears, The code 32 has not come back but 51 comes back. 37 does not go away. Engine light will not come on after starting...

Turn signals/hazards aren't working but the bulbs aren't out 3 Answers

So recently my turn signals and hazards stopped working on my 2006 Dodge Ram 1500, I've already checked every fuse and none are blown, all the bulbs are on, they're not out and they get power beca...