My turn signals work sporadically on my 99 Dodge Ram PU.No bulbs are out. I changed flasher units. Someone told me the lighting control module needs to be either replaced or reset.Does anyone have an answer?

My turn signals work sporadically on my 99 Dodge Ram PU.No bulbs are out. I changed flasher units. Someone told me the lighting control module needs to be either replaced or reset.Does anyone have an answer? 1 Answer

I have a 2001 Dodge Ram 1500. The turn signals work for a short period of time then they freeze. The signals are light on the dash, but aren't blinking. I have the problem when turning right, left, and when the hazard lights are on. I have replaced the fuse. What could the problem be? 3 Answers

Pickup has had the fuses replaced twice in the past two years. I can't seem to locate the problem and don't have the money for someone to look at it. Your advice would be very appreciated.

I put LED bulbs in my turn signals on my 94 Dodge ram 1500 and now they don't blink unless I use my hazards why is this? 1 Answer

Turn signals do not work now with the LED bulbs what do I need to do to make them work

I have a 2007 Dodge Ram 1500 SLT with the 4.7. The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with the engine knocking. Is it possible that the 1/4" difference in length caused the pistons to strike the longer, incorrect plugs hence, that caused the knock? The shop admitted to me that the wrong plugs had been ordered. When asked if it was possible that they may have installed the incorrect ones, they told me that the thread size wasn't the same. Well, truth be told, it is the same size thread. Thanks for any input! 2 Answers

The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with th...

Turn signals/hazards aren't working but the bulbs aren't out 3 Answers

So recently my turn signals and hazards stopped working on my 2006 Dodge Ram 1500, I've already checked every fuse and none are blown, all the bulbs are on, they're not out and they get power beca...