I have a 96 blazer it died on me and now will turn over but won't start, check fuel pump, changed fuel filter, rotor and still not starting any ideas

I have a 96 blazer it died on me and now will turn over but won't start, check fuel pump, changed fuel filter, rotor and still not starting any ideas 2 Answers

My 2002 Chevy Blazer is not starting, Sounds like it is fuel starved. Just filled the tank and got home fine next day it doesnt start. It turns over for a second and then wont stay on on. if i keep trying it sounds more like it isnt getting fuel. I am thinking since I let the tank get low to check m,y milage I may have picked up some gunk in the tank and cloged the line somewhere. Any suggestions on how to go about diagnosing and fixing this? 5 Answers

My 2002 Chevy Blazer is not starting, Sounds like it is fuel starved. Just filled the tank and got home fine next day it doesn't start. It turns over for a second and then wont stay on on. if i keep...

1999 Chevrolet Blazer 4.3L V6 Replaced CPI, fuel pump, fuel filter and fuel hoses but now the vehicle will not start. No gas to cpi unit. Do I need to bleed the system? 1 Answer

Replaced CPI, fuel filter, fuel pump, and fuel hoses. Unit will not start. Doesn't appearing to be getting fuel to cpi unit. Do I need to bleed the fuel system?

I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control module. We coming to a stop sign it will stall and sometimes when just sitting still. Sometimes it will start right back up and other times it takes several tries. I also have the oxygen sensor on order and it should be here tomorrow. Fuel pressure tested perfectly. No black smoke, no smell of rotten eggs or the cat glowing red. The only code that comes up is PO420. 4 Answers

I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control m...

1996 Chevy Blazer LS 4 door 4.3L vortec engine we were driving down the road and it was working good. Then I hear something pop in the front end. Right after that it got real rough skipping till we stoped at a light and it shut off. It will turnover but will not crank. We have changed the fuel pump sensor. Also the ignition control module has been changed 2 Answers

SUV was driving it and I heard a pop sound in the front some where. it started to skip really bad and shut off and has not cranked since, We have changed the fuel pump module or whatever it is calle...