i own a 1996 chev camaro 3.4 v6 auto......Great car but yesterday while driving all the guages started movinf onn there own....and then this morning i turn the key ...i dont get ignition or lights or anything but the car starts ....as long as i hold the key in the start position....of i let go it just looses ignition......any ideas

i own a 1996 chev camaro 3.4 v6 auto......Great car but yesterday while driving all the guages started movinf onn there own....and then this morning i turn the key ...i dont get ignition or lights or anything but the car starts ....as long as i hold the key in the start position....of i let go it just looses ignition......any ideas 2 Answers

I have a 1989 Camaro RS V6. On my way home from work yesterday I noticed that all my guages are floating the speedometer was bouncing around between 60 and 70 sporadically. The temperature gauge, oil gauge, rpm and gas gauge were all floating around when I slow down they all start coming back down? For just a second I smelt a very strong burning smell (electrical) that very quickly faded. The SES light has been on constant the whole time this is happening. Same thing was happening on the way to work this morning car is running and driving just fine. I guess today when I get home I can check the codes to see what codes I get as a starting point and work my way from there. I will also check the ground wires to see if maybe I am not getting good connection somewhere. Could it be my battery by chance? Maybe even a stripped wire somewhere?Any help would be greatly appreciated. Thanks! 4 Answers

I know the best advise would be taking it to a mechanic, but I do not have the funds for that they raped my wallet just a little over 2 months ago and now I am the only one working so there is just no...

Please, I would like to know where is located the VATS module in a 1999 Camaro. I have problem with the PASS II Key system. I changed the cylinder lock and the key, but the car starts not always. 2 Answers

I have problems wuth the PASS II Key System. I changed the ignition switch cylinder and bought a new key. I still have the same problem. The car only start in some ocassions. If I leave the key in...

I have a 88 camaro and I can't get fuel to the throttle body. I've changed fuel pump and filter. The car had been sitting for about 9 years but it was running when it was parked. Any ideas?? 3 Answers

I put the car in the shop. They did get it running but that was only long enough for them to rob me of $1200. I drove it about 30 miles and it was sputtering and kinda stalling. The next day it wa...

I JUST BOUGHT A ORIGINAL 74 Z-28(1974)(4 SPEED TRANSMISSION) ,IT WAS FACTORY ORDERED IN 1973,ANYWAY WHERE CAN I FIND REVERSE ON IT..I HAVEN'T DRIVEN CAR YET AND AS WELL MY KEY IS STUCK IN THE IGNITION, THANKS IF ANYONE CAN HELP... 2 Answers

1974 Z-28 FACTORY 4 SPEED, WAS ORDERED IN 1973 ,HAS POINTS IGNITION hAVE NOT DRIVEN CAR YET AND I'M STILL LOOKING FOR WHERE IS THE REVERSE GEAR ON IT...EXAMPLE IS IT LOWER RIGHT BOTTOM..SO FAR I CAN ...