i have a 94 camaro changed starter and it ran for 2 days and would not start not even a click changed ignition switch and security light comes on when i put the key in the switch and then goes off after 3 seconds and still no start what else could it be?

i have a 94 camaro changed starter and it ran for 2 days and would not start not even a click changed ignition switch and security light comes on when i put the key in the switch and then goes off after 3 seconds and still no start what else could it be? 1 Answer

Please, I would like to know where is located the VATS module in a 1999 Camaro. I have problem with the PASS II Key system. I changed the cylinder lock and the key, but the car starts not always. 2 Answers

I have problems wuth the PASS II Key System. I changed the ignition switch cylinder and bought a new key. I still have the same problem. The car only start in some ocassions. If I leave the key in...

hey john i have an 82 camaro that i put a 350 motor in it. i also added an electrical fuel pump instead of the mechanical pump. when i start my car she sounds great and i will put it in drive and start down the road she'll run great for about 2 miles then she sounds like its choking and dies. when i try to restart it in nuetral thers times it will run a lil rough and die when it is put in gear or there are times it won't start back up. what are your suggestions 3 Answers

hey john i have an 82 camaro that i put a 350 motor in it. i also added an electrical fuel pump instead of the mechanical pump. when i start my car she sounds great and i will put it in drive and star...

my 1996 camaro V-6 wont crank i changed starter and changed out the relay and now it wont crank and also when i turn the key on none of the lights come on at the dash and 1 Answer

well first of all the car sat for 5 yrs and then i bought it ok so i tryed starting it but starter was bad so i changed starter and then changed out the relay now it wont even crank and if i jump th...

i have a 94 camaro 3.4 v6 the motor is basically shot after have 200k miles on it but i came across some body that has a carberated 305 i was wonderin if i could switch out my 3.4 v6 for the 305 and keep the transmission the same since i just got a new1 and if i can wat snags would i come across 2 Answers

i have a brand new tranny and so forth i was wondering if i would have to part out my old motor change the mounts and so forth any info or tips would be much appriciated