I did a 2' body lift on my 2006 jeep wrangler unlimited - 33x10.5 tires.....with tire wear at 50% the tires shake. I've had them balanced...got new tires diferrent brand...50% wear...shaking again, wh
2 Answers
If you mean 'shake' as in 'grocery cart shake', when you go through a certain speed (mine was 52 mph) and only get it at that speed, it's tire balance and/or uneven wear from not rotating and rebalancing. Solid axles eliminate a lot of alignment problems, but they have quirks as well. You might have bad shocks or weak springs.
Papaobewon answered 9 years ago
Track bar is first suspect you must check the rubber bushings for excessive wear! Then the ball joints, after that check tie rod ends these are all culprit! The wheel and tire may be out of "round" but it is uncommon unless you verified wheels prior to wheel balance of tires!