I have a 1996 Chevy Z71. When your driving it feels like it's skipping. I replaced the spark plugs, wires and distributor cap. Still had the problem. Replaced egr valve still having issues. Any ideas

I have a 1996 Chevy Z71. When your driving it feels like it's skipping. I replaced the spark plugs, wires and distributor cap. Still had the problem. Replaced egr valve still having issues. Any ideas 1 Answer

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engine i think controls when the spark happens i also replaced the module on backside of distributer, the distributer, the coil,the wires the plugs, bht havent done the cap and roter.is that the only thing that will stop the spark process?ive also checked the oil pressure and water temp sensors 3 Answers

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engi...

I have a 95 z71 4x4 w/305 engine I have replaced plugs,wires,rigor,distributor,air flow sensors,map sensor,egr valve @I can't get this truck to stay idling it has a throttle body on it can anyne help 1 Answer

The truck runs good once u get on the hay but if u go to stop it'll die everytime can someone give me some advice on what to do?

I have a 94 Chev Silverado 350 ci. Have replaced the starter/solonoid, the cables, good batt. Still getting the solenoid click. Have to try a couple times then it starts regular. What could be causing this problem? 4 Answers

Have replaced everything having to do with a solonoid clicking, starter, solenoid, battery, cables. Why does the solenoid still click before engaging?