So how does one replace an oxygen sensor?
Asked by Jagwhisper Sep 19, 2016 at 12:56 AM about the 2002 Jaguar X-TYPE 2.5L AWD
Question type: Maintenance & Repair
X-type displays check engine light and goes into limp home mode
6 Answers
enginecreator answered 8 years ago
Pretty simple its in the exhaust so I would wait until cooled down, Locate them and use a wrench to remove it and same to install it, may have to use the electrical connector from the old one if you buy the one without the connector.
enginecreator answered 8 years ago
Threads directly into the exhaust and you see it sticking out from the exhaust with an electrical connection and wires coming from it.
enginecreator answered 8 years ago
Here below is a youtube video of the one in the exhaust manifold. Copy & paste it into browser.
enginecreator answered 8 years ago
https://www.youtube.com/watch?v=Z31b0v_zQ6s
enginecreator answered 8 years ago
There will be at least one more under the car just past the motor in the exhaust.
enginecreator answered 8 years ago
The Jaguar X Type is fitted with 4 O2 sensors one up-stream and one down-stream on each of Bank 1 and Bank 2 in line with OBDII requirements. So there you go you have 4 yes four oxygen sensors to replace.
