mANUAL TRANSMISSION wont shift into any gear
Asked by jorgesl May 12, 2012 at 12:05 PM about the 1986 Pontiac Fiero SE
Question type: Maintenance & Repair
it was alway tough to get into reverse last time I dorve it I could not get into reverse then next day I drove a few mile when I was parking I got it into reverse but the it would only go into reverse but not any other gears I worked on it with only an adjustable wrench and a tire oron I got it working when I got home I parked put it in reverse easily today it would not go into any gears
7 Answers
Which fiero do you have? Will it not even grind gears? If it grinds but won't engage, check clutch fluid. The fiero has a hydraulic clutch that can be kind of a pain. Mine just had an issue with that and reverse can be easier to engage than the other gears, especially since mine at least seems to have a lockout on the lower gears. If it won't even grind, grab a buddy and have him move the shiftter around and see what happens on the other end of the cables. Make sure the shift and select arms are moving properly. If not, might be bad shift or select are or bad cables.
it's a 86 fiero se 5 spd getrage transmission when I manually shift from transmission its self it will work until I put it in reverse I checked all the cable and they work smoothly when disconnected I will try what you said and see if that helps thank,s for your response I really apriciated
sounds like a clutch problem, could have a leak in either clutch master/ slave cylinder or the line, or broken clutch plate
Hi I have a 86 fiero gt with a 5 speed manual tranny it works.fine.and stuffb but seems.like when.it gets hot tranny wony.shift it grinds and it frustrates me.cuz I have to turn.it.off and.put.it.into gear any.help on what can.it be will be gladly apreciated thank you
porshie914 answered 6 years ago
Both my 86 gt 5 sped getrag had same issue both were resolved with Rodney Dickman selector cable ,it controls side to side movement and was easy to replace
porshie914 answered 6 years ago
Both my Fiero 86 gt 5 speed getrag had same issue both were resolved with Rodney Dickman selector cable ,it controls side to side movement and was easy to replace
Hi I have a 86 4cylinder with it off it will go into 1st and 2nd. Pretty rough but won’t go into any other gear. Won’t shift inbetween gears while running. I got it to start in second and let off clutch peddle and it moves but push back in and it doesn’t allow me to shift. Any help?
