Engine won't start when hot.
Asked by cgi Aug 25, 2012 at 02:04 AM about the 2008 Chrysler Town & Country LX FWD
Question type: Maintenance & Repair
I am having problems starting my van when the engine is hot. It cranks however it does not start. After
cooling down for 30 - 45 min. it works OK> Everything seems to be OK wants it starts.
I had one of the oxygen sensors changed. Did not help porblem
6 Answers
Something is heating up and not working. Could be the coil or crank position sensor.
Does either sensor have any control on the amount of gas being injected. It seems as though gas is not being injected
Crank position sensor controls when the fuel is sprayed
What did you find out on this problem cgi?
Similar issue, insert keyfob and turn and nothing but a click, new starter and battery installed at service station and when I went to get the van same issue, they said maybe the computer board needs update. Dealer said either keyfob battery low or no signal from keyfob to starter. Since new batter in keyfob...range to open and lock severely cut to a few feet away, TPM warning light on, stiil will not start if van has been running for 30 minutes, van engine must cool for 20 minutes before it will start. All other electrical operational. With radio, heater and AC. Off still will not start.
Guru9RJ87F answered 2 years ago
I have the same problem, but I have no answer yet! On a hot day I open the hood and let the engine cool quicker, and it always starts with a cool engine!
