I have a 2010 nissan altima that wouldn't start. Hit the brake pedal sharply to unstick the brake switch. Replaced switch. Car now starts. Now the brakes are applied ALL the time . Bleeding the brake

I have a 2010 nissan altima that wouldn't start. Hit the brake pedal sharply to unstick the brake switch. Replaced switch. Car now starts. Now the brakes are applied ALL the time . Bleeding the brake 1 Answer

Bleeding the brakes helps for 100' or so . Then grinds to a halt. It's like I have the pedal smashed to the floor. Any ideas??

So I have a 2017 Nissan Altima 2.5 sedan 4 cylinder and the issue is that the brake pedal keeps getting stiff so when I press the push start button it wont turn over but everything else comes on 1 Answer

So what is happening is my 2017 nissan altima sedan 2.5 4 cylinder the brake pedal keeps getting stiffer which isnt allowing me to turn my car on. When I do push the button everything else works lik...

My Altima 2010 will not start and the brake pedal will not move is there anyone out there that could help with this? 1 Answer

My Altima 2010 will not start and the brake pedal will not move is there anyone out there that could help with this?

I have a 1999 Nissan Altima, my brake light came on the other day and now when I apply the brakes, they work but I have to push the pedal to the ground and my car will slowly start to stop, I checked 1 Answer

Hello! I have a 2006 Nissan Altima. For about a few weeks, the brake and battery light has been going on. Today as I was driving, I couldn't accelerate. I got into the quickest parking spot 4 Answers

And put it in park, and it accelerated, and the brake and battery light came on again. I shut the car off and went to start it again, and it wouldn't turn over. Yet, the radio could go on, and th...