Gearbox problem
Asked by Mohammadhamed Jul 18, 2016 at 11:54 AM about the 1996 Mercedes-Benz C-Class Sedan
Question type: Maintenance & Repair
I have benz car c180 202 1996,automatic
4D transmission my car
change gear normally, but when i want to
break my car and stop then car shaking for
a second i mean when gear shifting back
from 3 to 2 an to one , what will be the
problem
10 Answers
Could be low transmission fluid,or bad shift cylinoid,or even a bad transmission mount.
Mohammadhamed answered 8 years ago
Could u plz tell me a little bit clear sir
First thing would be check your transmission fluid,if fluid is good and not low,and car shifts ok when you take off,then cylinoids are ok,next would be check the mounts on the transmission one may be busted giving you that shake.
Mohammadhamed answered 8 years ago
What u mean by bad shift cylinoid? And bad transmition mount?
Mohammadhamed answered 8 years ago
My car shif normally from 1 to 2 then to 3 but when i break my car i mean when my car becam slow so the gears shif back from 3 to 2 then one at this time it shake ? Genrally its normal
If it is shifting normal when you take off,and only does this when you let off the gas,it wont be a bad cylinoid,check the fluid,then check and make sure there is nothing binding car when you let off the gas,such as bad cv axel,s or rear end issue or even brakes,if the car down shifts like this there is something holding it back.
Mohammadhamed answered 8 years ago
Yes it did when i let the gass off. It shake the car for a second then change the gear from 3-2-1 ? But i cant get ur answer clearly sorry for taking ur time
Mohammadhamed answered 8 years ago
Yes it did when i let the gass off. It shake the car for a second it sound like (dug) then change the gear from 3-2-1 ? But i cant get ur answer clearly sorry for taking ur time
Hi i have c220 Merc if I select out of park in to drive it don't move