AgeeKustoms answered 9 years ago
wrench light is something wrong with your throttle. That light comes on to tell you that its going to limit the RPMs and fuel going into the motor, so you dont have a run away condition. Check your mass air flow sensor and your throttle. You're not going to be able to go into 4x4 mode until you clear that error.
Wrench lights up on the dash
2011 Ford F-250 Super Duty Lariat Crew Cab 4WD
-
Maintenance & Repair
My 4x4 engages my front drive line spins but my front tires are spinning
2006 Ford F-250 Super Duty Lariat Crew Cab 4WD
-
Maintenance & Repair
hubs will lock in while parked but won't lock in while driving
2006 Ford F-250 Super Duty Lariat SuperCab 4WD
-
Maintenance & Repair
Every window except front drivers won't operate, verified FRPS motor and switch works, removed FRDS master switch and other windows still won't operate.
1999 Ford F-250 Super Duty XL Crew Cab SB
-
Maintenance & Repair
4x4 works without a load hooked to it, hooked a trailer load of wood to it 4x4 quit working, dug a hole trying to pull it out. Unhooked the trailer 4x4 worked and pulled out of the hole
1999 Ford F-250 Super Duty
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.