2003 SEBRING GTC 2.7l MANUAL TRANS, RT AXLE, 1.155 IN SPLINE, CAN'T LOCATE
Asked by dapts Feb 21, 2012 at 10:58 AM about the 2003 Chrysler Sebring GTC Convertible FWD
Question type: Maintenance & Repair
Can not locate a replacement axle for this car. The transmission spline is 1.155 in not 1.00 in.
Chrysler does't have it, they sent axles with the same part number as the one removed and the
splines are different. The original axle CV joint is worn beyond rebuild.
10 Answers
There is a auto parts place located in Arizona that deals with nothing but Chrysler parts...I have the information at home. Will post it tonight...but wanted to let you know there maybe hope for this part...they have been excellent in getting every part I could not get from the dealer for my baby
Auto Salvage Co (602) 252-4591 943 W Magnolia St Phoenix, AZ 85007 Give them a call to see if they have your part... Good Luck!
Keeping Fingers Crossed !... If they don't have... ask them what the chances are of getting it in stock... etc...
Morning, I called Auto Salvage, they do not handle Axles anymore, and they have never seen a manual transmission Sebring. Thanks for the help. Dan
Oh, I am so sorry... here is another link that I use... mainly to see the prices... they have axles for your year car... might be of help to you... www.autopartswarehouse.com Joanie
www.discountbodyparts.com another link that has axles as well... and yes I understand that you have an off sized spline. one question comes to mind with that... is the original trans still in car, or was it replace with a different model possibly?
I am the original owner, the transmission and axles are original.
Did you see this answer yesterday regarding what you are looking for? Could be your answer! www.sebringclub.net/board/viewtopic.php?f=28&t=25093&p=257718 I have been trying to find one as well for you, and ran across this link tonight Good Luck!
Port Jeff Chrysler replace the right side axle in my 2003 Chrysler Sebring GTC with a 2.7Ltr and a MANUAL transmission. The axle was fabricated with new and old parts. Call Larry Biehl at 631-474-4015
