how to remove transmission
Asked by macetero69 Sep 30, 2014 at 03:40 PM about the 2002 Chrysler Sebring LXi Coupe FWD
Question type: Maintenance & Repair
it wont realease
3 Answers
macetero69 answered 10 years ago
how to remove transmission on a 2002 chrysler sebring coupe
migration_cdaigle197... answered 10 years ago
down load this - https://docs.google.com/file/d/0BxnHpg8wzx3NQkYzZ3pCcW9Jdms/edit - it's the factory service manual.... it will tell you everything you need for the car.
Once everything is lose slide trans towards driver's side of car, Front side comes out a few inches , back side just a inch or 2 cause the Diff. hits subframe. Reach inside the bellhousing remove flywheel bolts. Mark flywheel for correct alignment for reassembly. Leave flywheel in bellhousing. Now lower trans down & our. To install put flywheel in bellhousing. Raise up in to position. Install flywheel bolts. 18mm flex speed wrench works great. Just done 1 of these. Saved lot of time.