I replaced my distributor on my car and now it won't start. It did run before replacing. What could be the cause of this?

I replaced my distributor on my car and now it won't start. It did run before replacing. What could be the cause of this? 2 Answers

My '92 Caprice Classic will run fine for a day and then will stall and die at a stop. Sometimes c an restart, bvut often have to remove the breather, start it, put the breather back on. Also stalls when making turns. Air filter is good, I removed it and tried to start but no go. Have to remove the breather, start it, and then put it back on. Has a new distibuter, control module, fuel pump, fuel filter, oil pressure sesnsor, egr vale and solenoid. What might cause this? 4 Answers

My '92 Caprice Classic will run fine for a day and then will stall and die at a stop. Sometimes c an restart, bvut often have to remove the breather, start it, put the breather back on. Also stal...

i recently replaced my heater core and it doesnt have warm air like it did.ive noticed that between the heater hose from the core to the rad theres some type of control valve there with a tiny hose to it but it doesnt seem to work. what id like to know is can i run a straight hose from the rad to the care and eliminate it?also hose from block to core? any help would be appreciated 2 Answers

im hoping this will work!

Why wont my car start the lights turn on I have spark but it just clicks 10 Answers

Ive tried jumping it but nothing plz help

Car died and wouldnt turn over. Changed ignition coil now it cranks but no start. what could the problem be? 1 Answer

Was told it can be my ignition control module.