I have a 2008 ford crown victoria i cleaned the throttle body and changed the throttle position sensor now it won't stay cranked and my throttle wont move please help
8 Answers
need a better explanation,,,align everything again..the right way.. you said wont stay cranked...or running??? try again,,
Since i cleaned the throttle body and changed the throttle position sensor i cranked the car but it wont stay running i have nothing coming from the throttle at all.....my fault
the t.p. sensor is spring loaded sounds like you need to take it off and reinstall ip properly
Retrace your steps, check to see if TPS is installed properly and double check electrical connections to see if any were left loose.
Thankz guys i just got done taking things unloose ill take extra caution reinstalling everything i hope this also isnt also the gas pedal sensor stay tuned
I pieced everything back i have very little rpm's and it stayed cranked after two tries but i noticed a gas leak above but between cylinders 1 and 2
The computer needs to relearn the throttle value. First disconect pos and negative battery terminals then touch the pos with negative connectors for minute or so don't touch the battery terminal at all then reconect terminals to battery positive first then negative then turn key on then wait 15 sec then start car but don't touch gas peddle this is the computer returning idle values from cold to hot allow 15 minutes then after that drive around for a while for the computer to learn the shift values
The computer needs to relearn the throttle value. First disconect pos and negative battery terminals then touch the pos with negative connectors for minute or so don't touch the battery terminal at all then reconect terminals to battery positive first then negative then turn key on then wait 15 sec then start car but don't touch gas peddle this is the computer returning idle values from cold to hot allow 15 minutes then after that drive around for a while for the computer to learn the shift values, note every time you change any part of throttle body parts the throttle motor or gears you need the mcg to relearn the new values you tube will have videos on this subject to learn from
