CamaroCollector answered 9 years ago
If you have a push button 4x4 things to check for will be ,fuse, relay and power to the actuator on the front axle, if you do have power to the actuator and still doesn't work, the actuator may be bad.
aztec626bf answered 9 years ago
Given the year and the make I would say the actuator is bad. It's fairly easy to get at.
1996 GMC Jimmy 4 Dr SLT 4WD SUV
-
Maintenance & Repair
I have replaced the vacuum switch (which was bad)...the actuator is fine and there is no vacuum leaks...the control module is good...What's next? I am just enough mechanically inclined to be an idiot...
1998 GMC Jimmy 4 Dr SLE 4WD SUV
-
Maintenance & Repair
Can you pack the front wheel bearings on a 1995 gmc jimmy 4 wheel drive
1995 GMC Jimmy
-
Maintenance & Repair
I put my car in drive and it won't move. I start it in 2nd and when the rpms at 2 I shift into 3rd and it is okay but I can't use my drive gear. Filled with fluid because it was down and I only s...
2000 GMC Jimmy 4 Dr SLE 4WD SUV
-
Maintenance & Repair
I'm no mechanic but I was wondering if there's a way to take out the 4wd without harming the wheel bearing? Just want to make it a straight 2wd.
1996 GMC Jimmy 4 Dr SL 4WD SUV
-
Maintenance & Repair
CarGurus has 2 nationwide Jimmy listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.