What is the bolts called that goes to the air intake components
2 Answers
I think what is, the air intake components, but the bolts r not tight enough, so air comes in and makes the the engine swill
The air intake has two main components, the filter housing and the hose from the housing to the engine. Are you referring to these? The hose is attached at both ends by a clamp, either pressure type or screw type, if they are loose, all you need is new clamps and replace the old ones. If the air filter housing (box) does not close properly maybe the holes where the bolts screw in have enlarged in diameter, it is plastic, so try to remove them and get the type that you can manage to fit in the hole, a bit wider or larger. Or you may need to replace the air filter housing. If that is your question, I hope this helps.