Coil pack resistance
1 Answer
This is not for an Accent, but should get you in the ballpark....."Measurement of the primary coil resistance Measure the resistance between connector terminals 1 and 2 (the coils at the No.3 and No.6 cylinder sides) of the ignition coil, and between terminals 2 and 4 (the coils at the No.2 and No.5 cylinder sides), and between terminals 2 and 3 (the coils at the No.1 and No. 4 cylinder sides). Standard value: 0.74 ±10% (Ohms) Measurement of the secondary coil resistance Measure the resistance between the high-voltage terminal for the No.3 and No.6 cylinders, between the high-voltage terminals for the No.1 and No.4 cylinders and between the high-voltage terminals for the No.2 and No.5 cylinders. Standard value: 13.3 ±15% (K Ohms) CAUTION: When measuring the resistance of the secondary coil, be sure to disconnect the connector of the ignition coil."