I have a 1992 Silverado pick up 4*4 I changed the fuuel fitter spark pugs and cap and rotor and the coil and the ignition coil and the control module but still bogs out

I have a 1992 Silverado pick up 4*4 I changed the fuuel fitter spark pugs and cap and rotor and the coil and the ignition coil and the control module but still bogs out 1 Answer

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engine i think controls when the spark happens i also replaced the module on backside of distributer, the distributer, the coil,the wires the plugs, bht havent done the cap and roter.is that the only thing that will stop the spark process?ive also checked the oil pressure and water temp sensors 3 Answers

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engi...

I have a 96Chevy Silverado 5.7.shut down.changed the cap rotor,pick-up coil,coil,cps.truck runs rough.cuts out or chugs then dies.at a loss.took old coil. Laid it next to new one. Truck starts up and. 12 Answers

I've replaced everything from fuel pump to fuel filter, relay coil, ignition module, cap and rotor. will not start. have spark but low fuel pressure, pump is the 2nd brand new one. 1 Answer

only getting 10lbs of fuel pressure. Been chasing my tail for 2 plus weeks. It's the 5.7 vortec.

no fire after changing timing chain and ignition coil also changed the crankshaft sensor what else can i do for it to fire 4 Answers

timing chain slipped we replaced it reset all of that . turns over but gets no spark plugs and wires are new changed crank shaft sensor got a new battery still no spark what else can i do