my transmission has rattling noise around the bell housing which you can feel by touch at idle, and goes away as rpm increases

my transmission has rattling noise around the bell housing which you can feel by touch at idle, and goes away as rpm increases 1 Answer

i am having a problem with my 1996 ford explorer.when i put the transmission into gear and the car starts to move it makes a loud shaking and clanking noise in the left front end.people are telling me its the hub and knuckle but when i took the tire off i pushed the rotor around and it sounds like it is coming from the shaft after the knuckle can you tell me where to look 1 Answer

i have a 1996 ford explorer and i am having a problem in the front end.when i put the transmission into gear and start to drive there is a loud noise coming from the left front end.if i stop it goes a...

while sitting at a light or stop sign the RPM usually sits around 600 RPM. Lately it starts sudenly jumping to 900 and then down to 300 RPM. the truck has stalled and i had to restart the truck. 3 Answers

while sitting at a light or stop sign the RPM usually sits around 600 RPM. Lately it starts suddenly jumping to 900 and then down to 300 RPM. the truck has stalled and i had to restart the truck. wh...

Since my 2003 Ford Explorer returned from the shop it is driving away without my foot on the gas.How can I turn down the idle ? It is 900 rpm in park and over 1100 in drive with my foot OFF gas pedal 2 Answers

I took to another shop to have adjusted and they charged me $ 400 to replace 2 parts that they said would fix this drive away issue, but it is WORSE now! Yesterday in drive with my foot OFF of the ...

Rough idle after changing thermostat and the housing 2 Answers

Have 05 ford explorer housing had crack started overheating changed housing and thermostat about 1 week ago and now after about 500 miles it is idling really rough like it's going to die. Loud so...