Ford Bantam Questions Maintenance & Repair
Woodruff Key
How do I remove the Woodruff key from the front of the crankshaft , Ford bantam 1.3 rocam , timing chain driven
Water Bottle
My water bottle keep on cracking what can be the reason behind that? Ford bantam 1.6 rocam
Ford Bantam
ford bantam 1.3 rocam, i have replaced the oil pump, but when the engine is hot the oil light stays on and funny noise when idling , but when the engine is cold runs smooth
Ford Bantam Brakes
Hi, I have been having major issues with the brakes. I have changed the master cylinder and equalizer, I am not losing brake fluid. I have to bleed the brakes every week as it goes right down, the o...
Ford Bantam
Hi all my ford bantam drove perfect till i had a burst water pipe it stood for a year and i finely replaced the pipe now it wont start it cranks over but i got no spark and no fuel can anyone please...
Bantam Doesn't Start
hello.my ford bantam 1.3 doesn't want to start ,but there is petrol flow, sparks plugs spark, starter turns,timing is on point. what could be wrong.
Our Ford Bantam Petrol Starts But Does Not Rev Up
hello, we have a Ford bantam petrol that we are struggling with, we replaced the engine and all pipes that was needed but now the vehicle starts but does not rev up? can you please help?
Can A 2003 Bantam Ignition And Computer Box Work On A 2010 Without Having T...
Can I put in a 2003 bantam engine, gearbox, ignition and computer box into a 2010 bantam without having to program the key and changing the cluster? They are both 1.3L engines.
No Spark Nd Power
I changed my computer box nd key ..she's got no spark nd power by the instruments. .please help
My Ford Bantam 1,3 Rocam Giving Me Problem It Do Not Start When Its Raining...
my ford bantam 1,3 rocam giving me problem it do not start when its raining n cold but i have sealed computer box cables with rubber raising still it do not start but when its sunny n hot its start...
Ford Bantam Won't Start When Hot
Hie guys, i have a ford bantam 1.6i 1996 model only starts when cold but once i drive it around when i try to restart it cranks over.I have noticed the fuel pump located in the tank only pumps fuel...
Oilpump Problems
New oilpump but cam still runs dry..new filter and oil.
Ford Bantam
Searched for: i have a ford batam 2006 1600 rocam the engine has been done , it pings when i ref it , it does nor have a knock sensor and no wiring can i take wiring to the computer and put a knock se...
Ford Bantam 1.3 Rocam
Stater turns the motor for 3 to 4 times fuel pump is working enoungh spark and still does not start
Starting Problems
hi i have a ford bantam 1.6 carburetor motor. The car only starts when it is cold , but as soon as the temperature rises the engine just stops running.
What Is Size Of Crank Pully Bolt 14mm Xxxx
b3 1300 motor size crank pulley bolt metric 14mm x
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.