Ford Crown Victoria Questions Maintenance & Repair
2001 Crown Vic Won't Start Why?
Got a new battery. Started right up. Drove about 10 miles and then let it run about 10 more minutes. Wouldn't start. Ignition switch felt like I had to turn it farther than normal. Switch had f...
Will The Transmission From An 03 Crown Vic Police Interceptor Work In A 04?...
I have a chance to pick up a 2003 crown vic pi for cheap with a blown motor but good transmission. I have an 04 myself with a good motor and a blown transmission. So I was wondering if i could make th...
I Have A 2004 Ford Crown Victoria Interceptor. I Have Replaced The Crank Po...
The car first started stalling while driving, but would start right back up. Then it would only start after cooling down and finally it stalled at a stop sign and has not started since.
Grinding Noise When Applying Brakes In Reverse...only When Cold. 2004 Crow...
Our crown Vic police interceptor makes a grinding noise when backing if it is cold. Does not do it when driven awhile. Just had new brakes & pads done. What is this noise? anyone? 120,000 one own...
Car Wont Shift Have To Floor It To Get It In Second But Wont Go Into Drive ...
I have a 1985 crown vic was working fine but now wont shift .also tried checking fluid level with trans warm in park like the stick askes but fluids all over stick not allowing an accurate reading
Is My Transmission Gone?
I bought a 2006 Ford Crown Victoria Police Interceptor, with 147k miles, "with no problems with the transmission or any thing". Now I have 167k miles on my vehicle, just casual driving. So I le...
Crown Vic Speedometer/ Transmission Problem
my 2004 Crown Vic has problem that my mechanic is puzzled on. The speedometer started jumping wildly....but not every time I drove it. Then the OD OFF light started flashing and the transmission went...
1988 Ford Crown Victoria
When I went to work yesterday morning my car ran fine. When I went to start it after work nothing. Completely dead. We boosted it and it started but then quit again. So we boosted it again drove ...
WHY WHEN I START MY 1997 CROWN VIC UP IT MAKES A LOUD NOISE
I CHANGED THE FLAT WHEEL OR IS IT SOMETHING ELSE
Anyone Know Where To Find The Correct Ignition Lock Cylinder For 2007 Cvpi,...
it appears that the civilian version of ignition lock cylinders differ from the interceptor and i cant find a parts house to order a replacement . IDEAS anyone ??
I Have A 2001 Crown Vic Interceptor. Keep Getting Misfires On #4 And #7 Plu...
then it came back #4 & #7. What else could it be?
Automatic Transmission Flush
Hello. I have a 2002 Ford Crown Victoria (not a PI) with 133,255 miles. It has never given me any serious trouble. Every time I take it to the oil-change place (a National Chain) they want to do a tra...
Replaced All The Sensors Now What?
Help! The CEL came on we brought to the repair shop we always use. It was a temp sensor, they replaced both temp sensors and the thermostat but not the temp gauge doesn't go above one block and th...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.