Help
Asked by Chris Jan 29, 2018 at 07:36 PM about the 2004 Ford Expedition XLT
Question type: Maintenance & Repair
The truck will go in reverse fine, but at every stop
the transmission acts like it's in neutral. I have to
rev the engine to get it to go into gear, it slams into
first. (2500-3000 rpms) And it goes through all the
rest of the gears fine. Until i stop at a light,
intersection etc. then the process restarts. Put new
filter and fluid and still same issue. a couple of
times it stalled when trying to engage into 1st from
a stop.
7 Answers
what was the condition of fluid and filter? what was in pan and magnet?
firebird338 answered 6 years ago
No promises trying this but add some Lucas Transmission Stop Slip and see if that helps like I said no promises but it is worth a try.
Problem started after I had the oil changed and transmission serviced
Got all the cruddy fluid out that was making it shift properly. now with new slick stuff issues arrive.
CITYLIFE404 answered 6 years ago
Make sure the fluid is at the correct level. And make sure the filter is seated correctly and that the old gasket is not still in the hole after they removed the old filter. Problem sounds like an internal leak (loss of pressaure) in the transmission. But if the fluid is low. It could cause this issue and if the gasket(o-ring) is still in there from the old filter the transmission could be sucking air.