beatupchevy answered 5 years ago
go to the dealer and they can cut a new key from the vin. # more than likely , bring your wallet it's going to cost you .The new key may have to be "jiggled " to work it will be an original cut not worn down like the old one . . If the dummy key works good in the ignition they may re-cut the new one to make it work .
what other makes and models can you take a radiator off and it will match up with a 2000 Toyota Avalon
2000 Toyota Avalon XL
-
Maintenance & Repair
I recently had clicking with my starter motor in my 2000 Toyota Avalon. Had the battery checked, which is fine, but I replaced the starter motor. I turned the key in the ignition, and it started b...
2000 Toyota Avalon XLS
-
Maintenance & Repair
I changed the fuel pump on a 2000 toyota avalon...it works, i can hear it come on when I turn the key to start...but when I try to start the car, it want to turn over and start but there's no gas g...
2000 Toyota Avalon XLS
-
Maintenance & Repair
Can a 2003 toyota avalon hood fit on a 2000 toyota avalon?
2000 Toyota Avalon
-
Maintenance & Repair
I keep getting the same codes on my 2000 model Avalon P1346, P1135, and P1155. I have change all the O2 sensors(3) and both camshaft sensors, I am still getting the same codes. Toyota service found a ...
2000 Toyota Avalon XLS
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.