all fuses are good but dash lights don't come on even when i turn up the dimmer

all fuses are good but dash lights don't come on even when i turn up the dimmer 2 Answers

I have n47 head, when I removed it it had metal gasket and a head gasket do I have to put both plate and gasket on when I reassemble it. 1 Answer

Its a 78z but a 79 motor, N47 head, I need to know if the metal spacer on the engine head needs to be replaced?

Why are my gauges erratic on my 77? 4 Answers

The gauges go to appropriate levels at starting, then - in unison - the temp, oil pressure and fuel level all slowly go to zero, then head back up some then head back down some, etc. If it weren't al...

here is a tough one boys, I just installed a new engine into my 1978 Datsun 280Z, and I can't get it to start. It has fuel, spark, & compression. I have checked the valves & they R OK, timing is right 8 Answers

I have replaced the flow meter, the thermo time sending unit & the main Brain computer box and the ingnition switch and still don't even get a backfire. Any Help out there? I've been doing this for 50...

Car is blowing out a lot of smoke and stalling out. Why is the car doing this? 5 Answers

I have a 1978 Datsun 280Z. The car was running fine and perfect and one day it stalled on me and would not start back up. I changed the fuel pump and the fuel filter. The car now starts, but is blo...