Rack and pinion steering
20

Asked by RancheroGuy Apr 06, 2011 at 08:04 AM about the 1971 Ford Ranchero

Question type: Car Customization

Anyone installed a rack and pinion into '68-'71 Ranchero/Torino? I have found kits that change out complete front suspension, but at a big price. I just want to replace original P/S box and linkage. I can fabricate a crossmember to mount unit to but don't know which unit is right for rear steer and my track width. Will rack made for '70 mustang work with a little modification? Mine is a '71 GT. Also, can I replace front springs with Coil-over shocks for spring rate and adjustability?

3 Answers
30

kennebell2 answered 13 years ago

Sorry no way , Bull , I made a new cross member for my '71 GT and used a rack conversion for a '70-'71 mustang from flaming river with just a little modification . works fine and got rid of the original crap that never stopped leaking since it was new .A new cross member assembly with coilovers is available from Heidts also, that will work nicely . And I used a AOD overdrive trans w/cable to make the bloody thing get great mileage . with a 351c and a 2:75 rear end .

3 people found this helpful.
Mark helpful
20

RancheroGuy answered 13 years ago

Thanks, I talked to the Flaming River people recently in Charlotte and they are working on a unit spacificly for the Torino. Was the unit wide enough to reach the steering arms? Anyway I'm on it, Thanks again

Mark helpful

Your Answer:

Related Questions

  • Rack and pinion steering 3 Answers

    Anyone installed a rack and pinion into '68-'71 Ranchero/Torino? I have found kits that change out complete front suspension, but at a big price. I just want to replace original P/S box and linkage. I...

    1971 Ford Ranchero

    -

    Car Customization

  • '79 Ranchero- Steering wheel 3 Answers

    Does anyone know how involved or what steps to take to replace the factory steering wheel with a smaller grant wheel? I bought the grant wheel and kit, but how to take off the factory wheel... Do i ne...

    1979 Ford Ranchero

    -

    Car Customization

  • Power steering rack and pinion 1 Answer

    I have a 1933 Chev with a 1980 manual rack and pinion steering setup. I want power steering. I need to buy a 1980 power rack and pinion steering setup. Or is there something else that will fit it?

    Ford Falcon

    -

    Car Customization

  • How Do I Find Out the History of My 1972 Ford Ranchero GT 7 Answers

    I want to find out the history of my car. Where it was built, what original motor and tranny it had, colors, seats, etc. so I can restore it to close to original. Is there a place i can put in the VIN...

    1972 Ford Ranchero

    -

    Car Customization

  • Engine swap for a 68' Ranchero. Recommendations 4 Answers

    I currently have a 302 (52 years old) and would like to purchase a crate motor. What would you recommend and why? Cheers!

    1968 Ford Ranchero

    -

    Car Customization

Ranchero

Looking for a Used Ranchero in your area?

CarGurus has thousands of nationwide listings and the tools to find you a great deal.

Postal Code:

Shortcuts

Search Ford Ranchero Questions

CarGurus Experts

  • #1
    MrBlueOval
    Reputation
    320
  • #2
    James Sparrow
    Reputation
    190
  • #3
    Michael Tutty
    Reputation
    180
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Chevrolet El Camino
2 listings

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.