10 amp fuse keeps blowing out that control the driver door module
8 Answers
I changed the module and it worked for a minute then the fuse blew again. How can I check for a short in the wiring?
lincolnscott49 answered 5 years ago
You would have to understand this to find the short .... https://f01.justanswer.com/ref/https_gsi.ext.gm.com/image_en_us/gif/000/000/796%252F796682.gif
lincolnscott49 answered 5 years ago
what did you do to blow the fuse ? That may give you a clue where to look. rolled down the window then the fuse blew ( look for a problem in window motor or control switch
lincolnscott49 answered 5 years ago
when I tried to lock the door with the FOB the fuse blew check the electric lock mechanism
It seems to blow when I start my car. Or when I turn it off.
lincolnscott49 answered 5 years ago
Just turn on the ignition in the run position and try try door functions, don't start it. see if it blows another fuse. Try leaving the door open see if it shows a driver door ajar. Let me know what happens
My ignition fuse keeps blowing in the rear and I can't find the reason why I have a 05 Cadillac deville dhs