2000 dodge neon. Purchased from tow yard a stolen n recovery car. It was hot wired and every possible wire is hanging out of steering column and also broke ignition. Need to move it asap

2000 dodge neon. Purchased from tow yard a stolen n recovery car. It was hot wired and every possible wire is hanging out of steering column and also broke ignition. Need to move it asap 1 Answer

We just purchased a used 1995 Dodge Neon and we are having problems with it. The problem is the car will drive for approximately 15 to 20 minutes and the engine begins to jump and miss. When this occurs, we stop the car and let it cool for 10 to 15 minutes and then it will go for about 8 miles (10 to 15 minutes) and will start missing and jumping again. We took it to advance auto and they used a computer diagnostic machine and told us the ignition coil was malfunctioning, so we replaced it but it is still doing the same thing (missing and jumping). My wife says she smells a gas/fuel smell when it starts. Also, thought I had water in the gas tank, so I used dry gas but that didn't help either. Do the 1995 Neon's have a particular problem that sounds like mine? Thank you for any help you can give. 5 Answers

We are also having problems with the dashboard instrument lights and panel are not working. They also work on and off.

i replaced my radiator on a 2000 dodge neon 5 speed...i took the radiator from a 2000 dodge neon automatic...it leaks coolant through these tubes, is there an part that adapts to this and stops the leaks 2 Answers

the part of the radiator is at the very bottom is 2 copper tubes that look like they connect to some hoses my car doesnt have

Is a bar hanging down underneath my car it's got two ends on it and it connects to the wheels what is it it's in the front of car 2 Answers

What is the bar that goes between the two front wheels on the bottom

I have a 95 sohc neon that mysteriously blew coolant out from under it and lost all power and cranks but won't start... Is it possible that I blew my pump and it jumped time or is it a bent valve... 2 Answers

I'm trying to understand what is up with out having to put money that I don't have into tearing into it when it may not be the problem...