i have a 93 ramcharger 360 auto 4x4 the 4x4 qiut working i did some trouble shooting and found 2 rubber burnt into vacuum lines on the back of the eng top of transmissiom i traced one back to the f

Asked by pbbama Jan 11, 2012 at 10:38 AM about the 1993 Dodge Ramcharger

Question type: Maintenance & Repair

2 rubber vaccum line burnt into on the transmission ok i traced one line to the transfer case and the other to a plastic ball resivor on the frame on driverside that connects to the acuator on the axel . ok can some one tell me where the lines hook to on the engine or where they go thanks

gympy answered 12 years ago

manifold vacuum tree, constant vac from there supplies full positive vac at all Times

Mark helpful

Your Answer:

i have a 93 ramcharger 360 auto 4x4 the 4x4 qiut working i did some trouble shooting and found 2 rubber burnt into vacuum lines on the back of the eng top of transmissiom i traced one back to the f 1 Answer

2 rubber vaccum line burnt into on the transmission ok i traced one line to the transfer case and the other to a plastic ball resivor on the frame on driverside that connects to the acuator on the axe...

1993 Dodge Ramcharger

-

Maintenance & Repair
I have a 1987 Dodge Ramcharger, 360 engine. The fuel gauge does not work properly, but when the tank is half-full, the engine stops as if it is out of fuel. Fill up and OK. Thoughts? 1 Answer

1987 Dodge Ramcharger, 360 engine. Fuel gauge does not work properly. When tank is half full, the engine stops as if the tank is empty. Fill up and the engine runs OK. Any thoughts?

1987 Dodge Ramcharger 150 4WD

-

Maintenance & Repair
1989 Ramcharger 4X4, need to manually lock the axle coupler (under the vacuum motor) Does the fork go towards the wheel to lock, or towards the diff?Am broken in snowstorm now 4 Answers

need to know which way to move fork under vacuum motor on front axle to lock the axle coupler, and connect axle pieces together. Am broken in snowstorm. Thanks

1989 Dodge Ramcharger

-

Maintenance & Repair
i have a 85 ramcharger w/ 360. what is the correct fuze size for the turn signals 5 or 20 amp? 1 Answer

i have a 85 ramcharger w/ 360. what is the correct fuze size for the turn signals 5 or 20 amp?

1985 Dodge Ramcharger

-

Maintenance & Repair
H ave a 88 Ramcharger the won't start when you turn the key. hhhhhave headlights,intr. lights but dead at the key. Have checked everthing good ground,battery,power to fuse box good fuses nothing at k 6 Answers

I have a 1988 Dodge ram charger. I was tuning the truck, it started with no problems a few times. Then we were testing the timing some we started the truck put it drive with foot on the brake and push...

1988 Dodge Ramcharger

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

i have a 93 ramcharger 360 auto 4x4 the 4x4 qiut working i did some trouble shooting and found 2 rubber burnt into vacuum lines on the back of the eng top of transmissiom i traced one back to the f

1 Answer

Your Answer:

Shortcuts

Search Dodge Ramcharger Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

i have a 93 ramcharger 360 auto 4x4 the 4x4 qiut working i did some trouble shooting and found 2 rubber burnt into vacuum lines on the back of the eng top of transmissiom i traced one back to the f

1 Answer

Your Answer:

Related Questions