Poor running 2000 taurus SE
2000 Taurus with 97,700 miles. Car sat for several months without running, When I start it up, it runs rough, and sets a P0304 code, Cam position sensor problem. So, I replaced the Cam PS, and the Crank Position Sensor, also the coil pack, and Idle air valve. None of these made a difference. The car will start, with enough hesitation to reset the 0304 code, then will smooth out and run seemingly normally, until it gets warmed up,then when I press the gas pedal, it cuts out like an ignition problem, If I turn on the air, it seems to get worse.
I have put fresh gas in the tank, along with a water absorbent. I suspect the
computer now, as nothing seems to work. HELP!