Can the height control be set to stay in the low ride setting?
11 Answers
Why would you want to do that in the first place?? Normal ride height is set at that specific level for a reason, if you drive it in low height it will negatively affect the driving characteristics of the car. If the car is to high for you to get in you might want to consider buying a different car...
Does anyone know how the ride is after lowering evoque 1.2 with lowering kit? Does it loose its smooth ride...? Any input ?
Hey Lars! Are you an idiot? Obviously you know NOTHING about suspensions. This person is only interested in making access easier. But because u lack brain power I’ll help ya out. Lowering ur RR is advantageous 4 2 reasons. It looks better and it will help TREMENDOUSLY on tite mt. Roads. The lower it is the more stable it is!
One side is higher than the other side what button or knob do I turn it to
What can I do When if my my Range Rover front wheels are March raised that the back wheels and are stuck on that height
Mattzigman answered 4 years ago
I have a 2006 Range Rover hse and one day on my was to work is starts riding a little rough then has a little bit of vibration so I pull over to see if a tire is low or something. Front wheels are good but back passenger wheel is very hot and smells. Took it to brake check and they said it was a bad bearing. Told me is was $1400 so I took it to another shop . They said bearing wasn’t bad but might need shocks or suspension. What should I do?
Can you drive the RR when it is in high suspension mode.
Hallo, ik heb zopas een range rover sport 2006 overgenomen maar als ik hem een paar uur stilzet dan zakt die vooraan redelijk hard door zen luchtvering. weer iemand hier de oorzaak van?
Guru94GB2Q answered 4 years ago
Hi Guys, First post on here and I would appreciate your assistance please. I am thinking of buying a RRS HSE 2011 and I need a little help with the dimensions. The width and length are fine to be able to fit into the garage but the garage door height space is 1800 mm and the RRS height is 1789 which will leave only 11 mm clear (which is rather close). Is it possible to lower the suspension from normal road height of 1789 or is that as low as it will go? Regards Ian