1988 GMC Sierra air conditioner has no power at dashboard display, no blower, no heater. Checked the fuse dasand it is okay. Found a relay on firewall, but how can I tell if this is problem?

Asked by RebelRed1 Apr 10, 2014 at 02:53 PM about the 1988 GMC Sierra 1500

Question type: Maintenance & Repair

Checked the dashboard fuse and it is okay. Found a relay on firewall, but how can I tell if this is problem?

Jonathan answered 10 years ago

I had the same and turned out to be the controller module Had gone thru 2 then gm found a wire back feeding and blowing the unit. Had them run a new wire and put new controller in , no issues any more..... This is on my 97 gmc

Mark helpful

Your Answer:

1988 GMC Sierra air conditioner has no power at dashboard display, no blower, no heater. Checked the fuse dasand it is okay. Found a relay on firewall, but how can I tell if this is problem? 1 Answer

Checked the dashboard fuse and it is okay. Found a relay on firewall, but how can I tell if this is problem?

1988 GMC Sierra 1500

-

Maintenance & Repair
I have a 2010 gmc sierra, I get that service traction control, stabilitrak, engine power reduced. I changed the throttle body but no change? (Engine light is always on) 3 Answers

I lose power and can't go pass 40 mph. I have to pull over and turn the truck off and wait a few minutes, until I can drive again. Truck goes loud, and sort of rattles. Mileage is 140 500 estimat...

2010 GMC Sierra 1500

-

Maintenance & Repair
04 gmc sierra 1500 5.3 died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was zero) anyways checked fire none checked injectors they wasnt working either(built fuel pressure then unplugged fuel relay then turned engine over and the pressure stayed the exact same) i assume it might be the crank sensor but i would think it would throw a code, anyways came back this morning and before doing anything for the hell of it i checked the gas cap and tightened it and it fired up perfect three different times and the last time i let it run and it died after bout 45 seconds (fuel pressure reads 55) and after it died its doing the same thing cranks but wont fire or start 1 Answer

died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was...

2004 GMC Sierra 1500

-

Maintenance & Repair
Is the instrument cluster in a 2003 GMC Sierra on a fused circuit? If it is , can someone tell me where it is located? 1 Answer

My instrument cluster is not working after a hard time starting the truck. None of the gages don't work, but the warning lights do. Also, there is a light that looks like a car with a padlock locked t...

2003 GMC Sierra 1500 STD Standard Cab LB

-

Maintenance & Repair
I have a 2000 gmc sirra slt and I have no back up lights the fuse is good. Need help with this is there something I am missing. 2 Answers

I have a 2000 gmc sirra slt and I have no back up lights the fuse is good. Need help with this is there something I am missing.

2000 GMC Sierra 1500 SLT 4WD Extended Cab Stepside SB

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

1988 GMC Sierra air conditioner has no power at dashboard display, no blower, no heater. Checked the fuse dasand it is okay. Found a relay on firewall, but how can I tell if this is problem?

1 Answer

Your Answer:

Shortcuts

Search GMC Sierra 1500 Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

1988 GMC Sierra air conditioner has no power at dashboard display, no blower, no heater. Checked the fuse dasand it is okay. Found a relay on firewall, but how can I tell if this is problem?

1 Answer

Your Answer:

Related Questions