I would look at aftermarket aluminum heads. Check out speed shops like Summit Racing.
Jill, I want to see your hands and fingernails. I suspect you did not do this work yourself.
Yes. But Aluminum Heads would be way better especially if you are running over 9.5:1 CR=compression ratio. Aluminum runs cooler and better for a Street Rod. Good Luck ... 1Nimrod (Dustin)
I put a 94 chevy 350 in a 70' c10. I carborated the motor. What heads can i upgrade to?
1970 Chevrolet C/K 10
-
Car Customization
I was wondering if I could put a 84 chevy c10 steering column on a 83 chevy c10
1983 Chevrolet C/K 10
-
Car Customization
I am trying to install a 350 on my 65 chevy truck. It orginally had a six. I was told that the same mount from a six would work for v8 but the driver side mount won't line up to the truck bracket. The...
1965 Chevrolet C/K 10
-
Car Customization
need to know which car compatible for swap i heard a camero but which yr
1964 Chevrolet C/K 10
-
Car Customization
I have a 1980 chevy c10 shortbed and i want to swap out the rusted bed with a early 2000 chevy short bed stepside what will i have to change besides the fuel tank
1980 Chevrolet C/K 10 C10
-
Car Customization
CarGurus has 3 nationwide C/K 10 listings and the tools to find you a great deal.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.