Ok so i replaced the thermostat on my 96 Mazda millinia and the gasket keeps blowing out on me. Replaced it 3 times already. Made sure both sides of the housing were completely lined up n clean. ?????

Ok so i replaced the thermostat on my 96 Mazda millinia and the gasket keeps blowing out on me. Replaced it 3 times already. Made sure both sides of the housing were completely lined up n clean. ????? 1 Answer

my check engine light keeps coming on after like 3 or 4 days after resetting like when i start up in the mornings what could it be 4 Answers

the check engine like keeps coming back on after like 3 days of driving. always when i start up the morning of the 3rd or 4th day. i see that it is a small opening on the plate beisdes the engine wh...

I had the ERG valve replaced on 99 Millenia S 3 yrs ago and new ERG tube and catalitic converter 2 moths ago abd check engine light and code is pointing to ERG valve, Could it be anything else?? 1 Answer

I had the ERG valve replaced on 99 Millenia S 3 yrs ago and new ERG tube and catalitic converter installed 2 months ago. Check engine light came on shortly after last work done and code is pointing ...

Ive replaced the timing belt, the upper and lower idler pullys, the crank shaft sensor, and relined all of my timing marks correctly on my 99 Mazda Millenia but car still will not start. Please help 1 Answer

I have compression,fuel and spark but the car still won't start.

I put my 2002 Mazda in the shop for a oil leak,was told it was fixed but my car cut completely off and the shop has not fixed the problem its been iver three weeks..What should I do 1 Answer

The mechanuc says its a bolt they cnt take off I think they have messed up more