is there a way to bypass the

Asked by Kenneth May 28, 2016 at 08:16 PM about the 1998 Mercury Mountaineer

Question type: Maintenance & Repair

I is ais there a a way to bypass

45,205

jamnblues answered 8 years ago

While we're guessing, let me guess that you want to bypass the terrible image of being seen driving one of those things-

Mark helpful

Your Answer:

is there a way to bypass the 1 Answer

I is ais there a a way to bypass

1998 Mercury Mountaineer

-

Maintenance & Repair
I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. The digital display says that there is a "DOOR AJAR". I have checked all the doors as bet I can and they appear closed. BUT the interior lights remain on and the alarm will not set because off the ajar message. Am I missing something? Is the computer having a brain cramp.? I can get the alarm to set if I manually shut off the interior/dash lights too off. then it will work but no interior lights on the dash. This is driving me nuts. Can uou help?Thanks,John 12 Answers

I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. T...

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
I have a 2003 Mercury Mountaineer V6. I replaced the spark plugs, wires,and coil. It has a slight tapping sound coming from the engine and, there seems to be little or no spark from the wires on one side when the wires were pulled while engine running. 1 Answer

The wires were pulled off while the engine was running and what i think are the 1,2,and 3 cylinders had lots of arcing coming from the wires when they were pulled. On the other side, there was litt...

2003 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
ok I changed the pads on all four yires and needed to replace the two rotors on the back tire of my 2000 mountaineer .my truck stops but my pedal is going all the wy to the floor what is the problem a 2 Answers

as I said my pedal is going all the way to the floor after I replaced the break pads and the rotors on the back the vehicle stops but the break pedal goes all the way to the floor

2000 Mercury Mountaineer AWD

-

Maintenance & Repair
where is the evaporator in a 2003 Mercury Mountineer 2 Answers

The fan is working fine in my 2003 mountineer but there is not much air movement. I want to clean the ac evaporator but am looking for information to get to it with out damaging anything. Looking for ...

Mercury Mountaineer

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.