gas pedal not functioning

if the engine revs at all when you press the pedal than its not disconnected. you have another issue. sounds like it either cant get enough air in the engine or enough out. check to see if you intake is restricted or the exhaust is restricted

You are possibly in "limp mode" Transmission fault detected. "limp" to the parts house and get the fault codes and bring them back here, one of us will be happy to help

Any lights on dash lit?

...hey, there's a problem with the TPS....test it to see if the output is okay or ignored.

TPS meaning Throttle position Sensor, not to be confused with Tire Pressure Sensor

yes H25. seems quite reasonable...I mean where man interacts with machine, WILL be problems....'tis the nature of the beast- regardez:

Error Codes (In limp mode prompted these errors) PO500 Vehicle Speed Sensor (Replaced Sensor) PO717 Input Turbine Speed Sensor "A" no Signal (? couldn't find - Picture looks like old distrubutor with gear on bottom) PO793 Intermediate Shaft Speed Sensor "A" Circuit No Signal (Replaced Sensor) Also ABS Codes C0210 Rear Speed Sensor RH Circuit C0215 Rear Senson LH Circuit C1223 ABS Control System Malfunction

THE ERROR CODES WERE THESE CHEK, VSC,TAAC,IFF

yes