I have a 1993 lexus gs300 the check engine light and vsc light is on.We disconnected the battery cable and put it back on the lights went off but it runs like it's missing and a short while later the lights were back on. How can I fix this problem?

Asked by Melissa Sep 03, 2014 at 09:54 AM about the 1993 Lexus GS

Question type: Maintenance & Repair

FordNut answered 10 years ago

VSC means Vehicle Stability Control. It has nothing to do whatsoever with it running rough. When a Wheel speed sensor detects that any wheel is not spinning at the rpm it should be for the speed you are going the VSC kicks in..that should re-set its self after a while. But to find out why the CEL Check Engine is on, since you have a 1993 without OBDII you really need a mechanic

1 people found this helpful.

Best Answer Mark helpful

Your Answer:

I have a 1993 lexus gs300 the check engine light and vsc light is on.We disconnected the battery cable and put it back on the lights went off but it runs like it's missing and a short while later the lights were back on. How can I fix this problem? 1 Answer

1993 Lexus GS

-

Maintenance & Repair
I have a 1998 Lexus Gs300 and the vsc abs vsc off lights came on while I was driving. 2 Answers

While driving On my way to work I noticed the vsc abs vsc off lights came on. The car was driving fine but it still worried me. Once I got out of work and got back in the car the lights were off and...

1998 Lexus GS

-

Maintenance & Repair
Hi, my Lexus gs300 will not crank and start after being fine when parked up the night before. The radiator fan will kick in when ignition is on but engine will not start. Check VSC has come up. When diagnostic laptop attached it is unable to connect to the ecu for fault code. All very strange as all fine when left last night. Checked fuses, security light flashing and battery ok. Have you any ideas please. Thank you lee 3 Answers

Hi, my Lexus gs300 will not crank and start after being fine when parked up the night before. The radiator fan will kick in when ignition is on but engine will not start. Check VSC has come up. When d...

2005 Lexus GS 300 RWD

-

Maintenance & Repair
I have a 1998 lexus gs400 some lowlife Moran put sugar in my gas tank I drove my car it started sputtering and shut off on me I had it towed home I drained out all the fuel and cleaned out the fuel pu 2 Answers

I have a 1998 lexus gs400 some Moran put sugar in my gas tank I drained out fuel in the tank and cleaned all the sugar I can find I also cleaned out fuel pump but I can't find the fuel filter

1998 Lexus GS

-

Maintenance & Repair
VSC and Check Engine light recently came on 3 Answers

I recently got a VSC and Check engine light. I had the code read. It is C1201 (Engine Control System Malfunction) and P0304.(Cylinder 4 Misfire Detected).Could the Cylinder 4 Misfire cause the Engine ...

2008 Lexus GS 350 RWD

-

Maintenance & Repair

Used Lexus LS

27 listings starting at $7,900

Used Lexus ES

15 Great Deals out of 187 listings starting at $4,500

Used Honda Accord

40 Great Deals out of 909 listings starting at $2,799

Used Toyota Camry

53 Great Deals out of 963 listings starting at $2,212

Used BMW 3 Series

68 Great Deals out of 1,176 listings starting at $1,995

Used BMW 5 Series

18 Great Deals out of 335 listings starting at $4,500

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

I have a 1993 lexus gs300 the check engine light and vsc light is on.We disconnected the battery cable and put it back on the lights went off but it runs like it's missing and a short while later the lights were back on. How can I fix this problem?

1 Answer

Your Answer:

Shortcuts

Search Lexus GS Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

I have a 1993 lexus gs300 the check engine light and vsc light is on.We disconnected the battery cable and put it back on the lights went off but it runs like it's missing and a short while later the lights were back on. How can I fix this problem?

1 Answer

Your Answer:

Related Questions