fuel injection connecter
Asked by sturnbull91 Nov 04, 2012 at 06:47 PM about the 1990 Nissan 300ZX
Question type: Maintenance & Repair
found faulty connection with #6 injector connection. how do I repair it without replacing the whole harness?
Asked by sturnbull91 Nov 04, 2012 at 06:47 PM about the 1990 Nissan 300ZX
Question type: Maintenance & Repair
found faulty connection with #6 injector connection. how do I repair it without replacing the whole harness?
found faulty connection with #6 injector connection. how do I repair it without replacing the whole harness?
1990 Nissan 300ZX
-
Maintenance & Repair
coolant hoses replaced . now engine hesitates at about 2000-2300 rpm before Slowly dropping back to normal idle [about] 700 rpm. have to shift into neutral when stopping. otherwise, the engine is sti...
1985 Nissan 300ZX 2 Dr 2+2
-
Maintenance & Repair
1988 300 ZX, technical issue: The car as approximately 270,000 miles on it the car runs great and uses little oil between oil changes that are ever 5000 miles, I have used synthetic oil in it for the ...
1988 Nissan 300ZX
-
Maintenance & Repair
I have a 1986 Nissan 300zx that i bought; it turn over but don't start; gas was not getting up tp the fuel filler until I replaced the in tank fuel pump. Now gas is getting to the fuel filler, but ...
1986 Nissan 300ZX Base
-
Maintenance & Repair
Car started having issues like random bogging, dying out. Checked fuel pressure, only 20 psi changed fuel pump and filter. It ran good but still had a slow start and random dying. Checked spark an...
1984 Nissan 300ZX 2 Dr STD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.